Fall · Friendship · Intermediate Cards · Thank You · Thanksgiving

Harvest of Thanks

IMG_4032This is another card highlighting the Country Home DSP and Falling Leaves bundle from the 2018 Holiday Catalog.

Stampin’ Up! has a tagline called “Copy And Share Everything” or CASE. This card was CASEd from Amy Koenders out of Georgia.

I had already used up the wood background paper in the Country Lane DSP, so this is a substitution. There is also a nice wood print in the Nature’s Poem DSP if you don’t have the wood DSP handy.

Cut all of your paper as follows:

Score your 8.5×11″ Blackberry Bliss paper at 5.5″ on the long side. Then flip it and cut at 4.25″ on the short side to make the card bases.

The Crushed Curry background is 4×5.25″. Take another sheet and cut it at 4.25″ on the short side to cut the lacy border out.

The Whisper White inside is 3.75×5. Cut another sheet in half at 4.25″ on the short side for the front sentiments. (I stamped these with the Stamparatus, one inch apart by moving the plate down the hinges, then cut them out after stamping.

The wood DSP should be cut to 3.75″x5″.

The Blackberry Bliss DSP (I used some dots and some tin tile) should be cut to 3.75″x3″. To cut the angle, I flipped it over on the back so one corner touched the 1″ mark on my trimmer, and the other corner landed exactly where the cutting blade would cross. (See picture.)

img_4025

Stamp the inside sentiment in Shaded Spruce.

The outside sentiment, I stamped down a sheet of whisper white paper using the hinge and stepping it down one notch between each, then trimming them with my Stampin’ Trimmer. The angle cuts I just did with snips.

I used Soft Suede to stamp some leaves on to the wood DSP to add a bit more depth.

Use your Big Shot to cut the crushed curry “lace” piece that goes behind the angled cut on the Blackberry Bliss DSP.

My sandwich for this was:

  • Magnetic Plate
  • Precision Cutting Plate
  • Paper
  • Die (cutting side down)
  • Clear Cutting Plate

NOTE: I tried with the standard platform and thin die adapter and found it was very tight on my Big Shot and I was bowing my die. If you use the magnetic and precision plates together, be careful not to pinch your fingers!

For the copper leaf, I first cut the outline with the magnetic cutting plate and two standard cutting pads. If you have multiple cutting pads, find your smoothest one, as any marks on your top cutting pad will transfer onto the copper paper. Embossing helps, but they will still show.

Next, emboss the leaf with the embossing die from the same set. My sandwich for this was:

  • Standard Big Shot Platform
  • White plate that came with the embossing mats
  • Blue embossing mat
  • Copper Leaf
  • Embossing die (embossing side down)
  • Clear cutting plate

Note: SU recommends putting the die down first, embossing side up, but I just can’t keep it from shifting and with the foil paper, any washi tape leaves a line at it’s edge on my finished leaf.

Use your bone folder to curl the edges of the leaf to give it a bit of dimension.

 

Assemble the card using Snail on all of the card stock pieces and dimensionals for the leaf and sentiment.

If you have a Soft Suede Stampin’ Write marker or Stampin’ Blend, it’s a cute touch to add some dots behind the leaf to show a trail behind it as it “falls”.

Add some envelope flair, and you’re all set!

img_4031

Happy Stampin’

~Kristin


Product List

Christmas · Friendship · Intermediate Cards · Winter

Warm and Cozy

final_productIt’s a cold (California) evening, and I was feeling like making something cozy. This cute snowman card was fun to make, and highlights the new Shimmer Paint.

The card base is Balmy Blue, and is made by cutting a sheet of 8.5×11 paper in half. I like to score first, at 4.25″ on the short side, then flip and cut it in half at 5.5″

The background was a fun new technique I was playing with. The paper is standard (not thick) Whisper White card stock, cut at 4×5.25″. I embossed it first using the Cable Knit embossing folder. Then I mixed in a ramekin:

  • Four drops of Balmy Blue Ink
  • A good sized “glop” of Champagne Mist shimmer paint
  • About 2 tablespoons of regular rubbing alcohol

Here’s what the solution looked like:

Ramekin

Then I used a sponge brayer and rolled the mixture onto the paper. The sponge will absorb the whole amount of the liquid, but you can dab it off on the edge of the ramekin. I expiremented with how hard to push with the brayer and how much to have on the sponge, and you can see that you have a lot of options using the same mixture:

Embossed Layers

I used my heat tool to help dry the embossed layers more quickly, but with alcohol, if you did these first, they’d probably dry by the time you finished cutting and coloring the other pieces.
I found using the multipurpose glue was the best way to adhere the pieces to the card base, since there are so many different heights in this dynamic folder.
For the front sentiment and the snow people, the hinge stamping feature on the Stamparatus made this go very quickly. (I’m left handed if you’re trying to figure out why I use the top of the Stamparatus at that angle.) Another trick is to use a single width stamp case under it, so you can have the plate lie flat for inking.
stamparatus
I finished up with blends to color the snow people, and a touch of Wink of Stella to have them glitter too.
Here’s a close up of the finished card front:
Card Front
Thanks for reading, and happy stampin’!
~Kristin

Product List

Fall · Intermediate Cards · Thank You · Thanksgiving

Falling For Leaves Friendship Card

This fall card highlights the “Baby Wipe” technique.

To create an ombre effect, take a baby wipe and place it flat on a smooth surface, such as a large acrylic stamp block. Then use re-inkers in the desired colors and draw a line in each color with ink. Wait a moment or two and the inks will naturally blend.

For this card, I used:
Blackberry Bliss
Shaded Spruce
Pumpkin Pie
Crushed Curry

If the wipe starts to get dry, you can touch it up with a spritz of water.

Use the bone folder to curl the edges of your leaves to give the card a more dimensional effect.


Product List

Beginner Cards · Friendship

Dandelion Wishes

img_36932

This simple card is high impact, and a go-to for friendship notes.

I set up the Stamparatus with the dandelions and sentiment on one plate, and then the Bokeh Dots on a second plate. I was able to make 20 of this card in about 30 minutes.

One great feature of the Stamparatus is that if you have an uneven stamp, or miss a small part of a sentiment, you can just go right back over the original stamp.

This is a great beginner card, and one I use regularly as a “warm up” in a class to help folks get comfortable. These are really pretty and simple, and when I shared them with other Stampin’ Up! Demonstrators, this quickly became one of my most liked posts ever!


Product List

Beginner Cards

Clean and Simple

Sometimes the simple, clean cards are the ones that make my heart happiest. This quick and easy project highlights the Delightful Daisy Designer Series Paper and the new Double Stitched Ribbon. The ribbon is super fun because it has X’s on one side and dashes on the other. I used glue dots behind the center of the bow and both tails, and it held up well in the mail.

If you don’t have Night of Navy paper and ink, Dapper Denim is a close match instead. Here is a horizontal and vertical variation:

Materials List